Visualization is approximate. Colors on screen are never color-accurate for PVD — request a physical sample.
Stainless steel mosaic tiles
Other · Perforated & decorative
Stainless steel mosaic tiles are small stainless pieces, square, hexagonal, round or brick-shaped, assembled into sheets for interior walls. They take any of the group's stainless finishes, including PVD colour, and can be mixed with glass, ceramic or mother of pearl in the same sheet.
A physical swatch of this finish, on the metal you intend to use, ships with our compliments. Screens are not color-accurate — the sample is the specification.
About this finish
A mosaic tile is a small piece of stainless sheet, formed and finished individually, then laid up with others into a sheet that is fixed to the wall as one unit. Because each piece is finished before assembly, a single sheet can carry more than one surface: brushed beside mirror, silver beside gold PVD, flat beside embossed. That is what gives metal mosaic its depth compared with a single large panel.
The pictured range includes penny rounds, hexagons, small squares, subway bricks and basketweave bars, in brushed silver, mirror black, rose gold, antique bronze and gold PVD, some with embossed leaf or crackle motifs. The page says every stainless finish the group offers can be applied, and that glass, ceramic or mother of pearl pieces can be worked into the same sheet.
The group positions mosaic as a cost-effective way to treat an internal wall and states that the tiles are quick to install, with an installation sequence provided under its technical specifications. Mosaic is an interior wall product on this page: floors, immersed wet areas and exteriors are not listed, so confirm those uses before specifying.
Two specification points. Order all sheets for one wall from one batch, because brushed and PVD tones vary slightly between runs and mosaic puts hundreds of pieces side by side where the difference shows. And choose a grout and a grout cleaner that are stated as safe on stainless steel, since acid-based cleaning products mark the metal.
Where it is used
- Interior feature walls in hotels and residences
- Reception desk and bar fronts
- Column and pillar wraps
- Lift lobby and corridor dado panels
- Retail display backdrops
Variants
- Sa07
Sa20
Sa31
Sw 18001
Sw 18002
Sw 18003
Sw 18020
Sw 18050
Sw 18100
Sw 18150
Compatibility
| Base materials | Stainless steel |
|---|---|
| Combines with | Mirror, Hairline, PVD, Embossing |
| Indoor | Yes |
| Seaside | —316 or duplex; 304 stains in Jeddah/Dammam |
Care & maintenance
Wipe with warm water and mild detergent on a soft cloth, then rinse and dry. The grout joints hold dirt more than the metal does, so a soft brush along the joints helps. On brushed pieces wipe with the grain of each piece; on mirror pieces use a microfibre cloth.
- Do not use bleach, chloride-based cleaners or acid grout cleaners; they mark stainless steel.
- Do not use abrasive pads; they scratch brushed and mirror pieces alike.
- PVD-coloured pieces carry the colour in a thin ceramic layer; keep to soft cloths.
Products with this finish
No published products carry this finish yet — it is available on enquiry.
Frequently asked
- 01Can stainless steel mosaic tiles be mixed with glass or stone?
- Yes. The page states that glass, ceramic and mother of pearl can be combined with the stainless pieces in one sheet. Ask for a sample sheet of the exact mix before approving it.
- 02Are stainless steel mosaic tiles hard to install?
- No. The group describes them as quick to install and provides a step-by-step procedure under its technical specifications. Sheets are set like other mosaic: adhesive, sheet, then grout.
- 03Which finishes are available on stainless steel mosaic?
- All the stainless finishes the group offers, from brushed and mirror to PVD colours such as gold, rose gold and black, with embossed motifs on some ranges. The variants below are a selection from more than 300 catalogued designs.
Next
- Request a Sample
- The service behind this finishPolishing & Surface Finishing
- Metal surface area calculatorFinishing is priced by the square metre. Work out the area before you ask for a quotation.
Judge it in the hand
A physical swatch of this finish, on the metal you intend to use, ships with our compliments. Screens are not color-accurate — the sample is the specification.