Material database
3003
Aluminium. Values below are the requirements of the standard named beside them; the mill certificate governs the material delivered.
Designations
- UNS
- A93003
- EN number
- EN AW-3003
- EN name
- AlMn1Cu
Density
- Density
- 2730 kg/m³
- Per
- Hydro / Aluminium Association style alloy data
- Corrosion resistance
- Good
- Product forms
- Sheet, plate, coil
Chemical composition
| Standard | Product form | Basis | Si | Mn | Cu | Other rules |
|---|---|---|---|---|---|---|
| AA/ASTM chemistry reference | Wrought aluminium | Specification | ≤ 0.6 | 1–1.5 | 0.05–0.2 | Fe max 0.70; Zn max 0.10; Al remainder |
mass %. A blank cell means the standard sets no requirement for that element, not zero. Single values are limits: "≤" a maximum, "≥" a minimum.
Reference values from the cited standards. They describe what the standard requires, not a specific heat of material; the mill test certificate governs what is delivered.
Typical applications
Roofing, heat exchangers, general forming
Common questions
- 01What is the density of 3003?
- 2730 kg/m³ — the figure the weight calculators on this site use for 3003. The value is Hydro / Aluminium Association style alloy data’s.
- 02What is the chemical composition of 3003?
- Si ≤ 0.6, Mn 1–1.5, Cu 0.05–0.2, in mass %, to AA/ASTM chemistry reference. An element the standard sets no requirement for is left blank here rather than written as zero.
- 03What is 3003 used for?
- Roofing, heat exchangers, general forming