C11000
Copper. Values below are the requirements of the standard named beside them; the mill certificate governs the material delivered.
Designations
- UNS
- C11000
- EN number
- CW004A
- EN name
- Cu-ETP
Density
- Density
- 8940 kg/m³
- Per
- Copper Development Association
- Corrosion resistance
- Excellent
- Product forms
- Sheet, plate, bar
Chemical composition
| Standard | Product form | Basis | Other rules |
|---|---|---|---|
| ASTM/CDA reference | Copper | Specification | Cu including Ag >=99.90; O typically 0.02-0.04 |
mass %. A blank cell means the standard sets no requirement for that element, not zero. Single values are limits: "≤" a maximum, "≥" a minimum.
Reference values from the cited standards. They describe what the standard requires, not a specific heat of material; the mill test certificate governs what is delivered.
Mechanical properties
| Standard | Product form | Condition / temper | Test temperature | Tensile | Elongation min | Notes |
|---|---|---|---|---|---|---|
| ASTM/CDA reference | Sheet/Strip | Annealed / soft | 20 °C | 220–275 MPa | 30 % (Temper and thickness dependent) | Copper properties are strongly temper-dependent. |
Each row is one standard, one product form and one condition — the values do not transfer across rows. A blank cell means the standard sets no requirement.
Reference values from the cited standards. They describe what the standard requires, not a specific heat of material; the mill test certificate governs what is delivered.
Physical properties
| Temperature | Density | Young’s modulus | Poisson’s ratio | Thermal expansion (20–100°C) | Thermal conductivity (20°C) | Specific heat | Electrical resistivity (20°C) | Melting range | Magnetic |
|---|---|---|---|---|---|---|---|---|---|
| 20 °C | 8940 kg/m³ | 117 GPa | 0.34 | 16.9 µm/m·°C | 391 W/m·K | 0.385 kJ/kg·°C | 0.0172 µΩ·m | 1083–1083 °C | Non-magnetic |
Reference values from the cited standards. They describe what the standard requires, not a specific heat of material; the mill test certificate governs what is delivered.
Typical applications
Electrical, roofing, general copperwork
Common questions
- 01What is the density of C11000?
- 8940 kg/m³ — the figure the weight calculators on this site use for C11000. The value is Copper Development Association’s.
- 02What are the mechanical properties of C11000?
- Tensile 220–275 MPa, Elongation min ≥ 30 % — ASTM/CDA reference, Sheet/Strip, Annealed / soft. Those are the standard’s requirements; the mill test certificate governs the metal delivered.
- 03What is C11000 used for?
- Electrical, roofing, general copperwork