Pipe polishing runs the tube lengthwise through a series of abrasive belts and wheels that surround it, so the whole circumference is finished evenly along the full length. The finish is built up in stages, from a cutting grit that removes mill scale and weld seam to the final belt that sets the grain, or to buffing for a mirror. A handrail, a balustrade post or a hygienic line comes out with one continuous finish and no polished patch where a hand tool stopped.
What gets pipe-polished
- Handrail and balustrade tube in brushed and mirror stainless steel for buildings, malls and stations.
- Furniture and display tube — table frames, shelving, rails and fixtures.
- Hygienic process tube for food, beverage and pharmaceutical lines.
- Architectural columns and posts, before or after fabrication.
Why polish tube on a line
Hand polishing a long tube is slow and uneven: the grain wanders, pressure varies, and the ends look different from the middle. A centreless line holds the tube at a constant feed against fixed belts, so the grain runs true and the finish is the same at every point. Mill-finish tube from the same supply is polished to order, which means a project's handrail, posts and infill tube all match, and a repeat order next year matches too.
Polished tube goes on to our tube laser, bending and fabrication bays, so a balustrade can be polished, cut, fitted and welded — then re-polished at the joints — in one order.
From your tube to a finished length
- Tell us the tube size, wall thickness, length and quantity, and the finish you need — a grit number, a sample or a project reference.
- We confirm material and finish on a sample length, and agree end protection and packing.
- Tubes run through the line, are inspected under consistent light, and are sleeved or wrapped.
- Lengths are bundled for delivery — or cut, bent and fabricated in the same order.