C36000 sheet weight chart
Theoretical weights for C36000 sheet, calculated at 8500 kg/m³ — the density published on the C36000 data sheet. Thickness down the side, sheet size across the top.
C36000 sheet weighs 8.50 kg per square metre for every millimetre of thickness. A 1219 × 2438 mm sheet at 2 mm thick weighs 50.52 kg.
Weight by thickness and sheet size
- Density 8500 kg/m³
- Per Copper Development Association
| Thickness (mm) | kg/m² | 1000 × 2000 | 1219 × 2438 | 1250 × 2500 | 1500 × 3000 | 1524 × 3048 |
|---|---|---|---|---|---|---|
| 0.5 | 4.25 | 8.50 | 12.63 | 13.28 | 19.13 | 19.74 |
| 0.6 | 5.10 | 10.20 | 15.16 | 15.94 | 22.95 | 23.69 |
| 0.8 | 6.80 | 13.60 | 20.21 | 21.25 | 30.60 | 31.59 |
| 1 | 8.50 | 17.00 | 25.26 | 26.56 | 38.25 | 39.48 |
| 1.2 | 10.20 | 20.40 | 30.31 | 31.88 | 45.90 | 47.38 |
| 1.5 | 12.75 | 25.50 | 37.89 | 39.84 | 57.38 | 59.23 |
| 2 | 17.00 | 34.00 | 50.52 | 53.13 | 76.50 | 78.97 |
| 2.5 | 21.25 | 42.50 | 63.15 | 66.41 | 95.63 | 98.71 |
| 3 | 25.50 | 51.00 | 75.78 | 79.69 | 114.75 | 118.45 |
| 4 | 34.00 | 68.00 | 101.05 | 106.25 | 153.00 | 157.94 |
| 5 | 42.50 | 85.00 | 126.31 | 132.81 | 191.25 | 197.42 |
| 6 | 51.00 | 102.00 | 151.57 | 159.38 | 229.50 | 236.90 |
| 8 | 68.00 | 136.00 | 202.09 | 212.50 | 306.00 | 315.87 |
| 10 | 85.00 | 170.00 | 252.61 | 265.63 | 382.50 | 394.84 |
| 12 | 102.00 | 204.00 | 303.14 | 318.75 | 459.00 | 473.81 |
Sheet sizes in millimetres, width × length. Each figure is one whole sheet; the first column is the weight of one square metre at that thickness.
How the figure is calculated
Both columns run the same two formulas as the calculators on this site, at full precision — the figures are rounded only where they are printed.
Sheet weight (kg) = length (mm) × width (mm) × thickness (mm) × density (kg/m³) ÷ 1,000,000,000
Weight per square metre (kg/m²) = thickness (mm) × density (kg/m³) ÷ 1,000
The density used throughout is 8500 kg/m³, the value published for C36000.
Worked through for one sheet at 1219 × 2438 mm and 2 mm thick: 2438 × 1219 × 2 × 8500 ÷ 1,000,000,000 = 50.52 kg.
Theoretical weight, and what governs
Every figure here is theoretical mass from nominal dimensions. Delivered sheet runs to the thickness tolerance of the standard it is made to, and a sheet cut from coil varies in length as well, so actual weight falls either side of the table. The mill test certificate governs what is delivered and the weighbridge ticket governs what is invoiced.
Common questions
- 01How much does a 2 mm C36000 sheet weigh?
- A 1219 × 2438 mm sheet of C36000 at 2 mm weighs 50.52 kg, which is 17.00 kg per square metre. That is a theoretical weight from nominal dimensions; the mill test certificate governs what is delivered.
- 02What does C36000 sheet weigh per square metre?
- 8.50 kg per square metre for every millimetre of thickness, so C36000 at 2 mm is 17.00 kg/m². Multiply 8.50 by the thickness in millimetres for any other gauge.
- 03What is the density of C36000?
- 8500 kg/m³. That is the figure behind every weight on this page, and it is what makes C36000 8.50 kg per square metre for each millimetre of thickness. That figure is published by Copper Development Association.
- 04How do you calculate the weight of a metal sheet?
- Multiply length, width and thickness in millimetres, multiply by the density in kg/m³, then divide by 1,000,000,000 to get kilograms. For C36000 the density is 8500 kg/m³.
- 05Are these C36000 weights exact?
- No — they are theoretical weights from nominal dimensions. Real sheet runs to the thickness tolerance of its standard, so delivered weight falls either side of the figure shown. The mill test certificate governs.
These are the sizes and thicknesses flat product is conventionally made and quoted in, published so the weight can be looked up. Nothing here states what is held in stock — availability in any grade, size or thickness is confirmed on enquiry.